Step-by-Step DIY Dining Bench Plans

Published by Deanna Yates on

If you’re like me you love the look of Pottery Barn, West Elm and Restoration Hardware, but you hate the sticker price. That’s why I created my own furniture and put these DIY dining bench plans together so you can too. Read on to find out how you can craft a dining bench at home with simple materials from your nearest big-box hardware store.
I have always loved the look of a dining table with a bench on one side. I think it just helps keep the space less cluttered if you have an open dining area (like we do). All of those tall table backs can really start to close off the space, but a bench tucks neatly away.
This bench is very similar in construction to the DIY Pottery Barn Hyde Dining Table Knockoff. The legs are put together first, given shape with the long side aprons, and topped off (in this case) with 2 long planks. We used standard lumber from a big-box home improvement store so I’m pretty sure all of the pieces are pine. After construction, it was sanded down and stained with 3 coats of Minwax (Jacobean color). I used a pre-stain first to try and help keep the coat even. I finished it off with 2 coats of polyurethane.
This post is a long time coming and I apologize to those of you who have been waiting to build a bench with your . Here are the detailed plans to help you build a bench of your own.
The plans were put together using Google SketchUp and while I tried my hardest to keep all of the measurements exact, sometimes the program just would not work with me. So please follow the measurements and do not rely solely on the photos.

Dimensions:
52″ wide x 14.5″ deep x 18″ tall
Supplies List:
* 2 1/2″ Screws
* 1 – 4×4 post 8′ length (we used some left overs from the dining table)
* 8″ of 1 – 1×4 8′ length board (use scraps from the table project if possible)
* 1 – 2×2 8′ length board
* 2 – 2×4 8′ length board
* 1 – 2×8 8′ length boards
* Sandpaper (100, 150, and 220)
* Wood putty (If you want to cover the screws. We left the screws exposed and they still look great)
* Stain, varnish, paint or other finishing product
* Paint brush
Tools:
* measuring tape
* square
* pencil
* hammer
* safety glasses
* hearing protection
* mitre saw (or have the hardware store cut your wood for you)
* drill
* sander
Cut List:

A) 4 – 4×4 Posts @ 16.5″ (Legs)
B) 2 – 2×4 @ 10″ (Leg Joiners)
C) 2 – 2×4 @ 43″ (Side Aprons)
D) 4 – 1×4 @ 2″ (End Apron Spacer)
E) 2 – 2×4 @ 6″ (End Aprons)
F) 3 – 2×2 @ 10″ (Tabletop Supports)
G) 2 – 2×4 @ 14.5″ (Breadboard Ends)
H) 2 – 2×8 @ approx. 45″ (Benchtop Pieces – Measure the bench before cutting these boards)

Instructions:
Cut out all boards except H. To get the best fit, you will measure and precisely cut out each of the boards H to fit the bench. Remember, use the 2 1/2″ screws unless otherwise noted and always pre-drill and countersink your screws. Use glue on all joints to keep the table from separating later.
Step 1: Attach the end apron spacers (D) into the legs first, because the small space between the legs will make this step difficult later.
Building a farmhouse bench
Step 2: Screw the leg joiner (B) to the legs (A) as shown below. Do this on both sets of legs. Leave 1 1/2″ of space on the side of the leg joiners so the side aprons fit tightly.
DIY Dining Table Bench
Step 3: Screw the side aprons (C) into the ends of the leg joiners (B) as shown below.
How to build a bench
Check for square. Measure from one end diagonally across the table. Then measure on the other diagonal. If the measurements are the same, your table is square. If not, evaluate where you are off and make the necessary corrections.
Step 4: Screw the end aprons (E) into the end apron spacers as shown below.
Dining table bench plans
Step 5: Screw in the tabletop supports (F) as shown below, spacing the supports approximately 10″ apart.
DIY Dining Table Bench Plans
Step 6: Now screw the breadboard ends into the tops of the legs as shown below. The edge of the breadboard is centered on the leg.
Making a Dining Table Bench
Step 7: Take a length measurement between the breadboard ends. Be very precise and cut your first bench top piece(H). Place the board with one edge centered on the table and screw in place from the bottom through the supports (F). Measure the second bench top and put in place, screwing in through the supports.
DIY Farm House Bench How To
Step 8:  Stand back and admire your beautiful bench.
Our bench and matching table (pictured below) were stained using Minwax in Jacobean. There is one coat of wood stain primer, three coats of stain and three coats of polyurethane. We built it over a year ago and has held up very well so far.
DIY Pottery Barn Dining Table and Matching Bench
I’m linking here:
Whipperberry | Tatertots & Jello | ShabbyNest | Be Different, Act Normal | Lolly Jane Boutique | Family Ever After | The Creative Paige | 5 Days, 5 Ways | I Heart Nap Time | C.R.A.F.T | Sew Can Do | Keeping It Simple | Under the Table & Dreaming |Skip to My Lou | Nifty Thrifty Things | Petite Hermine | Home Stories A2Z | Romance on a Dime | A Bowl Full of Lemons | Homework | Tip Junkie | Lil Luna | Ginger Snap Crafts | It’s Overflowing | Night Owl Crafting | The Shady Porch | Junk in Their Trunk | Uncommon | The Artsy Girl Connection | Fabulously Flawed | Delightful Order | Today’s Creative Blog | One Artsy Mama | Miss Mustard Seed | Classy Clutter | Craft-O-Maniac | Goings on in Texas | Sew Chatty | The Girl Creative | Making the World Cuter | DIY Home Sweet Home | Vintage Mauve | Singing 3 Little Birds | Sugar Bee Crafts | The Creative Crate | Feathered Nest | How to Nest for Less | Mrs. Hines Class

Let's be friends:
Categories: DIY ideasLovely Home

16 Comments

DoctEar · July 10, 2017 at 9:16 pm

Hey Deanna,
This table and bench set turned out amazing. You did a really great job on the sketches as well.. Thanks for talking about using hearing protection during this project, it’s quite often overlooked.
Cheers!

florence · September 2, 2015 at 9:49 am

Is your stain oil based or water based? Lovely table!

    Deanna · September 2, 2015 at 9:17 pm

    Thank you! The stain we used for this project was oil based. It's stinky so make sure you're in a well ventilated area.

Beau · May 9, 2015 at 11:23 pm

I made this today. Your plans are excellent and very well spelled out. I would suggest one minor change, which would be to attach one breadboard, then the two seating planks, and then the final breadboard. BTW, I had to go to three stores to find non-pressure treated 4x4s. Thanks you!

lisa · May 2, 2015 at 9:50 pm

I made the bench from your design and it came out perfect.This was first time ever building anything and I’m so proud thanks to you.

Liz · December 13, 2014 at 6:41 pm

Thank you for the very detailed instructions, easy shopping list, and easy cut list! I made this bench for my condo, and my husband was a little wary, but I proved him wrong and it’s beautiful! So much fun to build it myself too 🙂

Becky · July 4, 2013 at 5:36 pm

Did you use treated 4x4x8s? We went to purchase today and that is all the big box stores here carry. I was warned to let either treated or untreated season (dry ut) for about four months before sealing. Ugh! I want this bench, LOL!

Lisa · June 21, 2013 at 7:21 pm

Can three college girls fit on the bench side of the table? We are considering making this for their house this fall, but 6 girls total in the house. Thanks!

    Deanna · June 26, 2013 at 9:28 pm

    Yes. You can easily fit 6 people around the table – 2 on each long side and one at the head and the foot of the table. You can fit 3 people on the bench, but it is a bit tight.

Brennan · April 22, 2013 at 3:30 pm

I am a bit confused and I’m only on step one! Are all the posts to be identical when I attach end apron spacers onto the legs? I did this and stopped because I feel like maybe they should be mirror image as opposed to identical placement.

    Deanna · April 22, 2013 at 7:40 pm

    Yes. They should be mirror images of each other so that the end apron fits snuggly in place. Let me know if you have any additional questions about the plans and I'll try to help.

Elizabeth · March 1, 2013 at 11:08 am

Your supply list calls for 2 1/2″ screws but in the instructions paragraph below it says to use 2 3/4″ unless otherwise noted. Could you clarify which to use? Also, when you lay the benchtop 2x8s side by side for 16″ (right?), how does the 14.5 inch breadboard end match up? It looks even like it is also 16″ in length. Thanks, this is my first project, my “mom-brain” and I want to make sure this turns out awesome!

    Deanna · March 14, 2013 at 2:44 pm

    Sorry for the discrepancy. I believe they are 2 1/2" screws. They are in a black and purple box at Home Depot. And the measurements for the breadboards are correct. Even though the seat boards are 2" x 8", the actual measurements are 1.5" x 7.25". Not sure why lumber measurements are so crazy! It's just how it is. Good luck with your 1st project!

    ken · April 19, 2013 at 10:39 pm

    A standard 2×8 if measured is about 1.5″ x 7.25″. There is a long explanation as to why which your local lumber salesman should be able to explain

DeDe@designeddecor · February 23, 2013 at 5:58 pm

This is a gerfeous table! I absolutly love the stain color! Nice job!

Candice · February 22, 2013 at 9:20 pm

Oh my word- I love it! I am going to build one for my boys room and one for my kitchen. LOVE! Pinning! Here from TT&J

Leave a Reply

Your email address will not be published. Required fields are marked *

Pinterest
Pinterest
Facebook
Facebook
RSS
Follow by Email